How To Open Gas Meter Box Without Key


Answers ( 4 )


    How To Open Gas Meter Box Without Key

    It is estimated that there are over 15 million gas meter boxes in the UK, most of which are located on people’s property. If you need to access your gas meter for any reason, you will need a key to open the box. However, what do you do if you don’t have a key? In this blog post, we will explore how to open a gas meter box without a key. From using a lock pick to wedge the door open, we will cover all the bases so that you can get into your gas meter box without any hassle.

    Tools You Will Need

    In order to open a gas meter box without a key, you will need the following tools:

    -A screwdriver
    -A hammer
    -A pair of pliers
    -An old credit card or similar item

    With these tools in hand, follow the steps below:

    1. Locate the screws holding the lid of the gas meter box in place. These are usually located near the hinge.
    2. Use the screwdriver to remove the screws, and then carefully lift the lid off of the box.
    3. Use the hammer to gently tap around the edge of the cover of the gas meter itself. This will loosen it so that you can pry it off with your hands or with the pliers.
    4. Underneath the cover, you will see a knob that needs to be turned in order to shut off the gas flow.

    However, this knob is often difficult to turn without a key. In order to turn it without a key, insert your credit card or other thin object into the space between the knob and its housing, and then apply pressure while turning it in either direction until it budges. Once it has moved, you can continue turning it by hand until it is fully turned off.

    The Process

    If you need to open your gas meter box and don’t have a key, don’t worry! It’s actually quite easy to do. Here’s a step-by-step guide on how to do it:

    1. Locate your gas meter box. It should be near the street, close to where the gas main enters your home.

    2. If there’s a padlock on the box, use a bolt cutter to cut through it.

    3. Once the lock is off, open the lid of the box. You may need to use a screwdriver to pry it open.

    4. Inside the box, you’ll see the gas meter itself and a shutoff valve. The shutoff valve is usually located on the right side of the meter (as you’re looking at it).

    5. To turn off the gas, rotate the handle of the shutoff valve clockwise until it’s in the “OFF” position.

    6. That’s it! You’ve now successfully turned off your home’s gas supply.


    Hopefully, this guide on how to open a gas meter box without a key has been helpful. Remember to always take safety precautions when working with gas, and if you’re ever in doubt, it’s best to call a professional. With these tips in mind, you should be able to easily access your gas meter box whenever you need to.


    It is important to know how to open a gas meter box without a key in case you ever find yourself in an emergency situation. Knowing what steps to take and the necessary tools can save you time and money. Here are some helpful tips on how to open a gas meter box without a key.

    First of all, it’s important that you turn off your main gas supply from the source before attempting to open the meter box. Make sure that no one is standing near the area when you do this, as it’s dangerous. After turning off your main gas supply, use a flat head screwdriver or similar tool to pry open the lid of the meter box without damaging it. You should then be able to access and inspect any internal components such as piping or valves inside the box.


    Have you ever been in a situation where you need to open a gas meter box without a key? We know, it can be a daunting task. But don’t worry! We’ve got you covered.

    In this blog, we’ll guide you through the various steps to open a gas meter box without a key. So, let’s get started!

    First, locate the gas meter box. Most gas meter boxes are located outside and are usually grey or brown in color. If you’re not able to find it, contact your local gas company and they can help you locate it.

    Next, you’ll need a few tools in order to open the box. These include a flathead screwdriver, a pair of pliers, and a hammer.

    ‍ Once you’ve gathered your tools, it’s time to start the process of opening the box. First, you’ll need to remove the screws from the top of the box. Then, use the flathead screwdriver to help pry open the lid.

    ️ Once the lid has been pried open, you’ll see a lever. This lever is used to open the box. Pull the lever down and the door should open.

    Now, you’ll need to disconnect the wires that lead to the meter. To do this, use the pliers to carefully disconnect the wires.

    Finally, you’ll need to remove the meter. To do this, you’ll need to use the hammer to tap the sides of the box. This will loosen the meter, allowing you to remove it.

    And there you have it! You’ve successfully opened a gas meter box without a key. Now all you have to do is reconnect the wires, close the box, and you’re good to go.

    We hope this blog has helped you open a gas meter box without a key. If you have any questions or need further assistance, don’t hesitate to contact us.


    ‍ Are you trying to open a gas meter box without a key?

    It’s not uncommon for people to find themselves in this situation – after all, keys can get lost or misplaced over time. Fortunately, there are a few ways you can open a gas meter box without a key. Let’s take a look at how you can do this safely and securely.

    Step 1: Check the Box

    The first step is to check the box itself. Depending on the type of meter box, there may be an available latch or a lock that is already open. If this is the case, you can simply lift the lid and gain access to the meter.

    Step 2: Pick the Lock

    If the lock is closed, you may be able to pick it. For this, you will need a flathead screwdriver and a pick. Insert the flathead screwdriver in the keyhole and use it to push the pins up until the lock clicks open.

    Step 3: Use a Lock Pick Gun

    If the lock is too difficult for you to pick, you can use a lock pick gun. A lock pick gun works by shooting a spring-loaded pin into the lock, allowing you to open it without a key. It’s important to note, however, that this method can be dangerous and should only be used as a last resort.

    Step 4: Drill the Lock

    If all else fails, you can always drill the lock. However, this should be done with caution, as it may damage the box and the gas meter inside. If you do decide to use this method, make sure you have the right tools and the right safety gear before you start drilling.

    These are just a few ways you can open a gas meter box without a key. Remember to always use caution when dealing with locks and gas meters to ensure your safety.

Leave an answer